Toll-Free: 800.755.2924 | info@hsmartin.com
GO
Home | About Us | History | Services | Ordering Info | Technical Info | Contact Us | Quote Request
Products Jacketed and Unjacketed Flasks Process and Bottom Outlet Valves Distilling Columns, Plain, Jacketed and Perforated Tray Condensers, Heat Exchangers and Product Coolers Laboratory Distillation Equipment Reflux and Separation Control Temperature and Control Jacketed and Unjacketed Reactors Reactor Covers and Caps Turnkey Reactor Systems Agitation and Stirring Equipment Borosilicate Glass Pipe and Fittings Borosilicate Glass Couplings / Flanges / Hardware ASTM Testing Apparatus Dewars and Cryogenics Equipment Adapters Optional Laboratory Equipment and Safety Accessories Vacuum Pumps and Traps Repairs Custom Engineering and System DesignUsed Equipment
All Categories > Agitation and Stirring Equipment > Agitator Assembly > 19 mm Shaft Agitator Assemblies  
 

19 mm Shaft Agitator Assemblies


Click on a Product to view details.

786870

19 mm Shaft Agitator Assembly


This agitator assembly features 25% glass-filled PTFE construction and a removable blade design. Blade dimensions are 1/4" thick, 1 3/4" high by 6" wide. This agitator is extremely durable and is suitable for use with 785740, 785750 and 785760 series 19mm stir shafts. The minimum center neck requirements are as follows: ST 55/50; SJ 75/50; 2" BP or 2" Conical pipe.
786880

19 mm Shaft Agitator Assembly, with Modified Blade


This agitator assembly is similar to 786870-0000, except for a design modification in the blade. Blade dimensions are 3/16" thick, 2" high by 6" wide. This agitator is also extremely durable and is suitable for use with 785740, 785750 and 785760 series 19mm stir shafts. The minimum center neck requirements are as follows: ST 103/60; SJ 102/75; 3" BP or 3” Conical pipe.
786875

19 mm Shaft Agitator Assembly, for use with Stabilizer Pin


This agitator assembly is the same as 786870-0000, with the exception that the body has been extended to accept the pin of the 826619-1190 and 1134 1" flush bottom valves. With the agitator stabilized by the bottom valve, "whip" in the stir shaft is virtually eliminated. The minimum center neck requirements are as follows: ST 55/50; SJ 75/50; 2" BP or 2" Conical pipe.
786885

19 mm Shaft Agitator Assembly, with Modified Blade, for use with Stabilizer Pin


This agitator assembly is the same as 786880-0000, with the exception that the body has been extended to accept the pin of the 826619-1190 and 1134 1" flush bottom valves. With the agitator stabilized by the bottom valve, "whip" in the stir shaft is virtually eliminated. The minimum center neck requirements are as follows: ST 103/60; SJ 102/75; 3" BP or 3" Conical pipe.
786860-1904

19 mm Shaft Adjustable Turbine Agitator Assembly


This agitator assembly is constructed of PTFE and is designed to be placed in the middle of the stir shaft, at a location which will be optimum for the desired mixing required. The height of the turbine can be adjusted to "match the batch" i.e. raise it for large batches, lower it for small batches, even add more than one turbine. The blade disc is 3/16" thick, 4" in diameter, and the 8 blades have been positioned at approximately 15º. This turbine will fit any H.S. Martin 19mm dia. stir shafts.
786865-0000

19 mm Shaft Quad-Blade Agitator Assembly


This agitator assembly fits onto the bottom end of the stir shaft, the same as the 786870 and 786880 series agitators, but provides 4 blades instead of 2. The blades are manufactured with a 45º level on the top leading edge, which creates a slight upward push of batch material, increasing mixing efficiency. Suitable for use with 785740, 785750, and 785760 series 19mm diameter stir shafts.
786866

19 mm Shaft Quad-Blade Agitator Assembly, for use with Stabilizer Pin


This agitator is the same as 786865-0000, with the exception of an extended body which accepts the pin of the 826619-1190 and 1134 flush bottom valves.
Site created by ThomasNet Web Solutions
H.S Martin Inc. | Glassware for Science and Industry